Item Description
1. One hinged cradle-variety hopper method which lowers load on clutch, transmission and motor.
2. Diesel engine of sixteen HP.
three. Four pneumatic wheels.
four. Cabin open from all 3 sides for simplicity in maintenance. Cabin provided with bolstered pressed ribs to prevent vibration.
Improved model: With pulley and winch, with lifting program.
| Product | TDCM200-13DL |
| Electricity supply | Diesel engine drinking water cooled and radiator |
| Drum ability | 680L |
| Unmixed capacity | 320L |
| Combined capability | 200L |
| Mixing time | 60s |
| Drum pace | twenty-22 r.p.m |
| Engine CZPT transmission | Chain |
| Mechanical | Clutch drive |
| Loading hopper | Hefty duty loading hopper with wire rope,brake,clutch |
| Chassis | Large responsibility strong steel chassis |
| Dimension | 1930×2300×2950mm |
| Bodyweight | 1250kg |
Web: www.topallmachinery.fr
In a dual pulley program, this ratio is equal to the reference diameter of the output pulley being better than the reference diameter of the input pulley. It really is pretty simple as lengthy as you estimate the gear ratios for a more sophisticated pulley technique action by stage. For several pulleys, the ratios of the a variety of components of the system should be calculated to determine the all round ratio. In the photograph previously mentioned, the reference diameter of the lower drive wheel is 20mm, the radius of the upper wheel is 40mm, and the ratio is 2:1. 2 spins on the decrease wheel and 1 spin on the higher wheel. The equipment ratio also tells us anything about the torque of the program due to the fact the ratio of output torque to input torque is equal to the gear ratio. As a result, the torque used to the higher wheel is two times as rapidly, but the velocity is halved.