Product Description
Higher-high quality 500mm wire twist bunching equipment
Software:
utilize to twisting of 7 far more strands copper wires or enamelled wire.
Large velocity stranding machine, also acknowledged as wire bunching equipment, can be commonly utilised for stranding all sorts of soft / challenging conductor wires (copper wire, enamelled wire, tinned wire, copper-clad metal, copper-clad aluminum, etc.) and electronic wires, this kind of as CZPT line, phone line, audio line, video line, vehicle line, network line, and so on.
[technical attribute]:
1. The maximum velocity of spindle is 3000rpm.
2. CZPT matic tension management: for the duration of strand winding, the winding tension wants to improve constantly when the winding is obtained from the bottom of the reel. This operate can automatically monitor and change the winding pressure Make the winding rigidity of the entire reel uniform, and the equipment can modify the pressure with out stopping.
three. The main motor is lubricated by oil and cooled by organic circulation, which efficiently prolongs the service lifestyle of the principal shaft bearing.
The wire passing system adopts a new composition. The wire passes immediately from the primary shaft information wheel to the bow belt, minus the scratch and strand jumping induced by the failure of the corner guide wheel on the aluminum plate.
4. A few tightening products are set in the equipment to ensure the roundness of the conductor following stranding and reduce the decline of insulating components
five. The complete equipment is pushed by synchronous belt. There is no lubrication level in the machine. The device is held clean and the stranded wire is free of oil stain. It is suitable for conductor stranding of CZPT wire sorts with higher floor cleanliness needs.
six. Only one particular take-off pulley needs to be replaced to change the stranding distance, and only the reversing rod demands to be pulled to adjust the stranding route, so as to function just, so as to decrease the mistake charge and operate intensity of the operator· The bearings of the whole machine are effectively-known brand names in Japan, and the bow belt is manufactured of new resources with good adaptability, so as to keep away from stock jumping caused by vibration in the course of high-velocity procedure. The frequency converter, PLC, magnetic particle clutch, electromagnetic brake and hydraulic jack are all imported nicely-recognized brands, so as to minimize the failure charge and routine maintenance cost.
Approach requirements:
Machine modle | DL300 | DL500 | DL630 |
Twisting segment(m) | .035-.937 | .073-2.five | .8-6.seven |
Diameter of single wire(mm) | .05-.28 | .08-.45 | .16-.63 |
Max pace(RPM) | 3000 | 3000 | 2000 |
Power(KW) | 3.7 | 5.five | 7.5 |
Gross weigh(KW)t | thirty | one hundred fifty | 550 |
Movable Pulley: A pulley that rotates and interprets according to the movement of the pulley or belt. This is generally utilised in blocking and deal with techniques, which I will make clear afterwards.